Problem installing PCI network card.
It is an old machine I want for some light work.
I don't think it has had a wired NIC before although it has had a wireless network adapter (which I don't have).
3 previously working cards all using the Realtek RTL8139 IC tried in 4 different slots of motherboard Asus A7V333 + Athlon XP2200+ running XP SP2.
Cards are recognised by the BIOS but Windows shows error message when trying to load the driver:
--------------
Cannot instal the hardware.
There was a a problem installing the hardware:
Ethernet controller
An error occurred during the installation of the device.
The data is invalid.
---------------
In Device manager any/all the NICs are shown as 'Other Devices' with yellow question marks.
Properties of one shows:
location: PCI slot 1(PCI Bus0 device 12 function 0)
This device is not configured correctly (Code 1)
PCI\VEN_10EC&DEV_8139&SUBSYS_813910EC&REV_10\3&61AAA01&60
---------------------------
I've tried running the setup program RSET8139.exe at DOS prompt but it says there are no NICs present in the system.
I've never had a problem with this type of card before, they usually install using default drivers.
(The machine currently has no internet connection-of course I'll try sneakernet to for TSG_Sysinfo))
Any ideas?
(Hope this hasn't double posted)
Tech Support Guy System Info Utility version 1.0.0.2
OS Version: Microsoft Windows XP Home Edition, Service Pack 2, 32 bit
Processor: AMD Athlon(TM) XP 2200+, x86 Family 6 Model 8 Stepping 0
Processor Count: 1
RAM: 1535 Mb
Graphics Card: NVIDIA GeForce4 Ti 4200, 64 Mb
Hard Drives: C: Total - 76332 MB, Free - 52508 MB;
Motherboard: ASUSTeK Computer INC., A7V333
Antivirus: None
It is an old machine I want for some light work.
I don't think it has had a wired NIC before although it has had a wireless network adapter (which I don't have).
3 previously working cards all using the Realtek RTL8139 IC tried in 4 different slots of motherboard Asus A7V333 + Athlon XP2200+ running XP SP2.
Cards are recognised by the BIOS but Windows shows error message when trying to load the driver:
--------------
Cannot instal the hardware.
There was a a problem installing the hardware:
Ethernet controller
An error occurred during the installation of the device.
The data is invalid.
---------------
In Device manager any/all the NICs are shown as 'Other Devices' with yellow question marks.
Properties of one shows:
location: PCI slot 1(PCI Bus0 device 12 function 0)
This device is not configured correctly (Code 1)
PCI\VEN_10EC&DEV_8139&SUBSYS_813910EC&REV_10\3&61AAA01&60
---------------------------
I've tried running the setup program RSET8139.exe at DOS prompt but it says there are no NICs present in the system.
I've never had a problem with this type of card before, they usually install using default drivers.
(The machine currently has no internet connection-of course I'll try sneakernet to for TSG_Sysinfo))
Any ideas?
(Hope this hasn't double posted)
Tech Support Guy System Info Utility version 1.0.0.2
OS Version: Microsoft Windows XP Home Edition, Service Pack 2, 32 bit
Processor: AMD Athlon(TM) XP 2200+, x86 Family 6 Model 8 Stepping 0
Processor Count: 1
RAM: 1535 Mb
Graphics Card: NVIDIA GeForce4 Ti 4200, 64 Mb
Hard Drives: C: Total - 76332 MB, Free - 52508 MB;
Motherboard: ASUSTeK Computer INC., A7V333
Antivirus: None